Rectifier Module | DC Power Supply

Ngā Kāwai Hua

Nga hua kua whakaatuhia

48Vdc &220VDC modular whakarara kore-kore me te pākahiko parakore o te ngaru ngaru iverter 3kw moder
19 Inihi 110vdc & 220VDC Parallella Inverter Kaiwhakamahi Kaiwhakamahi Whakatakotoranga Mate Utu
DC 48V 10000 Watt Worverter 10kva parakore ngaru kaha iverter telecom 4u rack Maunga inverter
Pūnaha Mana Whakauru 3u DC 48v 150A Ka huri te tuku hiko
Kotahi-Wahanga BWITT 48V ki a AC220V 1000W 1000W Pau i te Sine Wave Fine Fine Inverter 1000W i roto i te snmp

Whakapā mai

Copyright @ 2025 Shenzhen BWitt Co., Whāiti
Waea:+86-18820237701
Whatsapp：+86 18822867573
Aiea:support@bwitt.com.cn
Kōrero:9 / W, Whare 20, Te Pūtaiao Pūtaiao me te Hangarau Hangarau, 19 Te huarahi o te Raifeng Huifeng, Zhongkai High-Hangarau, Huizhou City, Porowini Guangdong

Pūnaha Mana Whakauru 40A Te Pūnaha Whakahoahoa Modular 100 AMP 24vDC AC ki te DC te tuku hiko me te mahi o te pākahiko

telecom rectifier 48v rectifier system for telecom

Tirohia etahi atu pikitia

Whakaaturanga:

RCT-2000 modular rectifier system is widely deployed in the telecom/industrial field. It provide telecom power technology to modulate voltage for DC load and maintain back-up batteries.It treble hot swap rectifier modules build a N+1 redundancy, have high fault tolerant reliablity for important load. To adaptable in different external power system, the powerful monitor have 45 alarm option, support RS485/ SNMP remote operation.

Āhua：

24/220-30He
24/220-40He
24/220-60He
24/220-100He
24/220-180He
24/220-300He
24/220-360He

- +

Tāpiri ki te uiui 0

- +

Tāpiri ki te uiui 0

- +

Tāpiri ki te uiui 0

Tukuna he imeera ki a maatau Whakapaa inaianei Tangohia te PDF

Nga kiko o te hua

Nga tohu

Panui.

This type Embedded Power System is widely deployed in the Telecom/Industrial environment today, a new generation “Green & Energy Saving” system, aiming at outdoor low power mobile Telecom/Industrial power market, meeting the trend of Telecom base station development, saving construction cost and shortening time. The system is highly adaptable with environment, features with wide operating temperature range, meeting the demand of high level users.

Tono

He pai ki te mana o te whakawhitiwhiti korero mai i te 1-10kw
1. Te Telecom Telecom / Papa / Taputapu Taputapu
2. Teihana korero.
3. Pokapū Raraunga Rorohiko
4. Whatunga scada me nga taputapu raraunga
5. Turanga waea / pūtau
6. Teihana reo irirangi / Paetaki Pūtau
7. Rūma pokapū
8.Pūrere WiFi Taone
9. Motuka whakawhitiwhiti ohorere
10. Kāwa & hei.ro
11. Nga punaha Antenna i tohatohahia
12. Moana & uta
13. Nga punaha whakahaere whakahaere
14. Nga punaha whakaoho ahi
15. Te Whakahaere Pūnaha Whakahaere / Mahinga
16. Te tipu / Teihana
17.Pūnaha Aroturuki mana
18.Pūnaha mana solar
19.Pūnaha pūngao hau

Nga painga hua

1.Widely operating range of AC input voltage: 90~290Vac n
2.60 amp output per module, 180 amp system capacity max for 2U （Whole system 600 amp max)
3.Perfect battery management, accessory battery temperature detector
4.Current/voltage switching tech with high efficiency: ≥93.2%
5.Temperature compensation, LLVD and BLVD protection
6.Compact 2U 19’ inch rackmount shelf
7.Real-time detection of operating status, sound-light alarm
8.Abnormal log record: input over/ under voltage protection, output over voltage protection, output over current protection,
9.output short circuit protection, over temperature alarm, AC loss alarm etc.

If you have some problems about Embedded Power System 3u dc 48v 150A switching power supply, e hiahia ana ranei kia mohio koe ki etahi atu korero mo te Rack Maunga Telecom Forverter,Pūnaha Pūhiko Rauemi Telecom,Kainga ki te kaainga poaka ngaru,Solar Mpverter,DC ki te DC Converter, take. Nau mai ki te whakapā atu ki a matou!

Kei te titiro whakamua koe ki to uiui !

Mua n

Pūnaha Mana Whakauru 3u DC 48v 150A Ka huri te tuku hiko

Muri atu

DC 48V 10000 Watt Worverter 10kva parakore ngaru kaha iverter telecom 4u rack Maunga inverter

Tukuna to kupu ki a maatau:

Taunakitanga Hua

Kāo.	Item		Technical Specifications
1	Environmental Requirements	Operating temperature	-40℃~55℃(-40 to +131°F)
		Storage temperature	-45℃~70℃ (-40 to +158°F)
		Relative humidity RH	5%~95%RH（40±2℃，no condensation）
		Atmospheric pressure	62kPa~106kPa
		Teitei	0m~2000m
		Degree of protection	Ip20
2	AC Distribution	Input mode	Single phase input
		Input voltage	220Rere
		Voltage range	90V ~ 290VAC
		Hohokitanga	45 Hz ~ 65Hz
		System efficiency	≥93.2% （@230Vac，Peaking）
		System input power factor	≥0.99（@230Vac，full load）
		Thad	＜5% （@230Vac，full load）
		System protection function	AC overvoltage& under-voltage protection; DC overvoltage&under- voltage.current limit.short circuit protection; battery and rectifier over temperature protection; automatic restoration happens after the over-voltage.over-current.under-voltage and over-temperature disappear.
3	DC Distribution	System output voltage	Rated output：24Vdc
		System output voltage	Adjustable range: 20VDC-30VDC continuously adjustable
		System output current	24V/30A
		System load regulation	≤±0.5%
		System voltage regulation	≤±0.5%
		System stability precision	≤±0.5%
		Current sharing capability	module current sharing not more than ±5％
		Phone balance weight noise	≤2mV（@230Vac，full load）
		Peak-peak noise voltage	≤200mV(0 MHz ~ 20MHz) （@220Vac，half load ~ full load）
		system current limit value	Power system: 1-33He,Note: can be settable continuously
		System voltage drop	At full load. the voltage drop of DC distribution within the rack shall below 500 mV
		Output distribution	Load distribution:3@ 135A Rail Mount Terminal
		Battery distribution	Battery distribution：1*@135A Rail mount Terminal
4	Module And Monitoring Unit	Rectifier hot-swap	Hot-swap available.not influencing system operation
		Rectifier indication	with operation.alarm.and fault indicators
		Soft start time	3s-10s
		rectifier fault influence	Not influencing the set parameters of rectifier when rectifier at fault
		Remote monitoring	With remote metering & remote control & remote signaling functions. providing standard RS485&TCP/IP Interface and 6 sets of the dry contact output port & Battery Temp.Sensor
		Monitoring unit	English language in LCD screen of the rectifier,
		Monitoring unit	The parameters can be set through the monitoring unit. with parameter set and power-failure data store functions. Max 1000 Units vents.
		Installation method	Rectifier module support swappable
		Remote control	rectifier start and close.battery test. equalize and float charging ,DIN /DO configuration and so on
		Alarm functions	With AC over voltage/under voltage.DC voltage over/under.module Communication fault and over temperature alarm,Battery remove,Surge and so on
5	Safety	Insulation resistance	Testing voltage 500VDC， Insulation Resistance ≥10M (normal atmospheric pressure, normal temperature, relative humidity <90%, no condensation)
		Te kaha o te whakauru	Input to output: 3500VDC @1min&leak current ≤10mA
			Input to enclosures: 3500VDC @1min&leak current ≤10mA
			Output to enclosures:750VDC @1min&leak current ≤10mA
		System leak current	≤3.5mA（2320Vac input）
		Grounding performance requirements	The system with operating ground and protection ground.with clear mark.the resistance between the enclosures of distribution and all palpable metal components and grounding nut is not more than 0.1Ω
		AC lightning protection	The equipment AC side can bear simulated lightning impulse Current of waveform 8/20μS and rated amplitude 40kA.(Kāre herea)
		EMC	In accordance with EN55022 CLASS A,GB9254 CLASS A,FCC PART15 CLASS A,GB17626-1998,IEC 61000-3-2
6	Batty	Battery low voltage alarm and protection （BLVD）	When DC voltage below battery protection threshold value and there is no AC input. the battery protection alarm.lasting for 1 min.battery protection DC connect cut off.
6	Batty	Battery management function	With battery management function; with the function of the manual or automatic shift of equalized or float charging status of the battery.current limit charging at equalized state; Temperature compensation for the system output voltage,(equalized and float voltage can be adjusted automatically based on 1~2 00（adjustable）mV/cell/℃.the higher the battery temperature.the lower the float voltage.).
7	others	Turituri	≤55db (He) (measured at 1m distance from the equipment)
		MTBF	≥ 100000 Haora haora
		Impact and vibration	1. Can bear impact of peak acceleration 150m/s2 lasting for 11ms
		Impact and vibration	2. Can bear sine wave vibration of frequency (10 ~ 55)Hz and amplitude 0.35mm.
		Material flame retardant performance	1.The flame retardant class of PCB used in system and module controller meet V-0 requirements of GB4943.
			2.UL certificated flame retardant cable is adopted.
			3.The flame retardant class of insulation materials meets V-1 requirements of UL regulations.
8	Mechanical Data	Chassis coating	Meeting damp-proof and corrosion-proof requirements.there is a surface coating on the enclosures. which meets below requirements:
			1. Making the adhesion test in accordance with ISO 2409. reaching 0 class.
			2. Making a pencil hardness test in accordance with ASTM D3363.not less than 2H.
			3. Making impact test in accordance with ASTM D2794.reaching 50kg.cm.
			4. Making salt frog
		Cabinet material	Material: CRCA ; thickness:1.5mm
		Inenga (W×D×H)	Cabinet: 482mm×410mm×88mm (W×D×H)
		Taumaha (kg)	Appro: 15kg